
# Copyright (c) 2000-2015 Synology Inc. All rights reserved.

[common]
commfail	=	"Connection failed. Please check your network settings."
loading	=	"Loading..."

[dual_boot_error]
boot_err_IF_count_not_match	=	"Please make sure you have the identical network adapters on both servers."
boot_err_enc_list	=	"Please confirm you have connected your expansion units to this server in the correct order."
boot_err_enc_sn_is_empty	=	"Incorrect serial number of the expansion unit."
boot_err_enc_validation	=	"Please confirm your expansion unit(s) have been connected to both servers in an identical order."
boot_err_local_host_sn_is_empty	=	"Incorrect serial number of this server. Please contact Synology support team for assistance."
boot_err_no_enc	=	"No expansion unit found."
boot_err_no_err	=	"Please rescan your local network with Web Assistant to connect to your high-availability cluster."
boot_err_no_hb_link	=	"Please confirm the heartbeat network is connected correctly."
boot_err_no_hb_link_or_enc_list_not_match	=	"Please make sure your expansion unit(s) have been connected to both servers in the identical order, and the Heartbeat connection is normal."
title	=	"{0} ran into a problem"
title_solved	=	"Problems are solved"
unknown_error	=	"Unknown error"

[dual_passive_ui]
des_memory_error	=	"The memory size of this server is different from of the original active server."
des_net_error	=	"Errors occurred in the monitored network interface(s) of this server."
des_no_err	=	"Please go to find.synology.com to search for and connect to the active server."
des_service_error	=	"Errors occurred in the monitored service(s) of this server."
des_try_again	=	"Errors occurred in this server. Please try again later. If the problem persists, please power on the active server, or reboot this server."
des_upgrade_comm_error	=	"Failed to connect to the unknown server. Please check the connections of the unknown server. (E.g. LAN, Heartbeat, expansion units)"
des_upgrade_net_error	=	"Failed to detect the other server via LAN and Heartbeat connections. Please check the LAN and Heartbeat connections to that server."
title_fail_to_promote	=	"This server has encoutered an error, and failed to take over as the active server"
title_fail_to_upgrade	=	"Upgrade Failed"
title_repair_passive_finish	=	"Recovery Complete"
title_unknown_error	=	"Unknown errors"
try_again	=	"Please try again"

[dual_recover]
desc	=	"Please click "Connect" to go to the active server, and add this server to the high-availability cluster."
desc_recover_by_passive	=	"Please click "Connect" to go to the passive server, and add this server to the high-availability cluster."
err_no_enc	=	"No expansion unit found."
err_title	=	"{0} ran into a problem"
install_desc	=	"Please click "Connect" to go to the other server, and proceed with the installation."
install_title	=	"Installation has started on the other server"
installing_desc	=	"Please wait for the completion of installation on the other server."
installing_title	=	"Installation in Progress"
redirect_to_active	=	"Connect"
redirect_to_passive	=	"Connect"
redirect_to_remote	=	"Connect"
remote_ip_not_found	=	"Failed to get the IP address of the other server. Please go to find.synology.com to search for the other server."
title	=	"This server is not in a cluster"
unknown_desc	=	"Please try again later."
unknown_title	=	"Failed to check the status of the other server"

[error]
boot_damaged	=	"The built-in installation file is corrupted. Please choose another type of installation."
err_dsconfig	=	"Failed to apply system configurations. Please install again later."
error_apply_lock	=	"Failed to apply your settings because another installation is in progress."
error_dir_nopath	=	"No _OSNAME_ installation file is found. Please select the file again."
error_download	=	"Failed to download the _OSNAME_ installation file. Please check the network connection and try again."
error_mkfs	=	"Failed to format the disk."
error_model	=	"You have to use the _OSNAME_ installation file suited for {0}."
error_nochoosefile	=	"Please select a DSM installation file (.pat)."
error_nodisk	=	"Hard drive not detected. Please check if the hard drive is well connected to the motherboard."
error_recover	=	"The telnet service of your _DISKSTATION_ has been enabled for diagnosis. If you are still unable to re-install _OSNAME_, please configure your router and forward port TCP 23 to your {0}, and then contact the Synology support team for help."
error_unknown	=	"An error occurred during installation. The telnet service of _DISKSTATION_ is turned on for error determination. Please configure your router to forward port 23 to _DISKSTATION_, and then contact Synology online support."
error_upload	=	"Failed to upload the _OSNAME_ installation file. Please check the network connection and try again."
error_version	=	"You have to use an installation file of {0} or later."
no_space	=	"Available system space is insufficient."
recover	=	"Failed to perform system recovery on your _DISKSTATION_. Please go to the previous step and re-install _OSNAME_."
tcpip_ip_used	=	"The IP address has been used!"

[network]
netbkp_account	=	"Username"

[nodisk]
conn_again	=	"Connect Again"
dualhead_nodisk_has_sata_disk	=	"Please check if only SAS drives have been installed in the expansion units, and no SATA drives are installed."
dualhead_title_has_sata_disk	=	"Detected SATA drives on {0}"
nodisk_desc	=	"Please install hard disk(s) before reconnecting."
nosd_desc	=	"Please install micro SD card which is more than 4GB before reconnecting."
nosd_title	=	"No Micro SD Card Found on {0}"
sd_not_enough_desc	=	"Size of micro SD card is not enough, please install micro SD card which is more than 4GB before reconnecting."
sd_not_enough_title	=	"Micro SD card size on {0} is not enough"
title	=	"No Hard Disk Found on {0}"

[nvr]
apply_setting_upper	=	"Applying System Settings..."
close	=	"Close"
confirm_check	=	"I understand that all data on the hard disk {0} will be deleted when the installation begins."
confirm_desc	=	"Continue to install DSM will delete all data on the hard disk {0}. Are you sure that you want to do installation?"
confirm_install	=	"I understand that all data on my hard disks will be deleted when the installation begins."
install_surveillance_title	=	"Install NVR"
install_volume_title	=	"SHR and Volume Creation"
install_wait_SSPkg	=	"Installing Surveillance Station. Please wait..."
install_wait_sys_partition	=	"Establishing system partition. Please wait..."
install_waiting_no_reboot	=	"While you are waiting, visit {0} to learn more about the Surveillance Station running on your NVR."
ni_wait	=	"Your NVR will be ready soon. Please have a cup of tea..."
ok	=	"OK"

[status]
crash	=	"Configuration lost"
mem_testing	=	"Performing memory test"
migrate	=	"Migratable"
migrate_same_model	=	"Update Required"
recoverable	=	"Recoverable"
uninstall	=	"Not installed"
updating	=	"Upgrading"

[web_assistant_mobile]
eula_postfix	=	"End User License Agreement"
eula_prefix	=	"By clicking Install Now, you agree to the {0}."
web_asst_mobile_dhcp	=	"DHCP"
web_asst_mobile_diskstation_info	=	"Setup Password"
web_asst_mobile_dns	=	"DNS"
web_asst_mobile_err_cable	=	"Please connect the network cable to _DISKSTATION_."
web_asst_mobile_err_internet	=	"Cannot connect to the Internet."
web_asst_mobile_err_no_disk	=	"No disks found. Please turn off your _DISKSTATION_, install disks and then continue installation."
web_asst_mobile_err_nopat	=	"Failed to download _OSNAME_ installation file. Please contact Synology support for help."
web_asst_mobile_err_patch	=	"Cannot download the installation file. Please try again later."
web_asst_mobile_err_pppoefail	=	"Failed to apply PPPoE settings due to incorrect account or password."
web_asst_mobile_formatting	=	"Formatting system partition..."
web_asst_mobile_gateway	=	"Gateway"
web_asst_mobile_hint	=	"All data will be cleared on the drives. Please back them up before proceeding."
web_asst_mobile_info	=	"After the installation, you will be redirected to the login page."
web_asst_mobile_ip	=	"IP address"
web_asst_mobile_netmask	=	"Netmask"
web_asst_mobile_next	=	"Next"
web_asst_mobile_password	=	"Password"
web_asst_mobile_pppoe	=	"PPPoE"
web_asst_mobile_rebooting	=	"_DISKSTATION_ is rebooting, and your Wi-Fi connection will be disconnected. Please re-connect and enter the server name {0} in your browser."
web_asst_mobile_required	=	"Required"
web_asst_mobile_retype	=	"Retype password"
web_asst_mobile_setup_network	=	"Setup Network"
web_asst_mobile_shr	=	"Create RAID storage"
web_asst_mobile_start	=	"Tap Start to setup your _DISKSTATION_"
web_asst_mobile_startbtn	=	"Start"
web_asst_mobile_static_ip	=	"Static IP"
web_asst_mobile_status_download	=	"Downloading _OSNAME_ installation file..."
web_asst_mobile_title	=	"Web Assistant"
web_asst_mobile_username	=	"User name"
web_asst_mobile_verify	=	"Verify"
web_asst_mobile_vtype_bad_dns	=	"The DNS address you entered is invalid."
web_asst_mobile_vtype_bad_gateway	=	"The gateway address you entered is invalid."

[welcome]
button_install	=	"Install"
button_migrate	=	"Migrate"
button_recover	=	"Recover"
button_reinstall	=	"Re-install"
button_setup	=	"Set up"
desc_crash	=	"DSM on your {0} has been reset so you are required to re-install DSM."
desc_install	=	"Set up your Synology {0} now!"
desc_mem_test	=	"Your {0} is performing memory test so you cannot install DSM now. Please try again later."
desc_migrate	=	"We've detected that you had moved the hard drives from {0} to {1}. You can migrate your data and settings to your new Synology NAS now."
desc_migrate_same_model	=	"We've detected that the hard drives of your current {0} had been moved from a previous {0}, and installing a newer DSM is required before continuing."
desc_oops	=	"Errors occurred on your {0}. Please contact the Synology support team for help."
desc_recover	=	"We've detected that you had moved the hard drives to a new {0}. Please click Recover if you want to recover your data and settings now."
desc_updating	=	"Installing DSM on your {0}."
device_info	=	"Device Info"
title_oops	=	"Oops!"
title_welcome	=	"Welcome!"
title_welcome_back	=	"Welcome Back!"
warning_ro_cache	=	"Read-only SSD cache on the hard drives of your previous {0} will be removed after the installation."
warning_rw_cache	=	"Read-write SSD cache has been detected on the hard drives. To prevent data loss, please remove the SSD cache on your previous {0} before the installation."
warning_sata_port_disabled	=	"We've detected errors on the hard drives ({0}), and the SATA ports have also been disabled. Please shut down your {1} to replace or remove the hard drives and try again."

[wizard]
4kn_disk_desc	=	"The following hard drives are 4K native HDDs and are not supported on your DSM version: {0}"
admin_acc	=	"Administrator account"
apply	=	"Applying..."
apply_step_desc	=	"Your _DISKSTATION_ will be ready in approximately 10 minutes. Please wait, and do not turn off the power during this procedure."
apply_step_desc_v2	=	"Your _DISKSTATION_ will be ready in approximately 10 minutes. Please do not turn off the power during the procedure."
apply_step_title	=	"Installing DiskStation Manager"
boot_chk	=	"Verify built-in DSM"
boot_patch	=	"Install built-in DSM"
clean_install	=	"Clean installation: keep my files only"
clean_install_info	=	"Keep my files, whereas all settings and data will be restored to default."
conf_exit	=	"{0} has not finished. Are you sure you want to exit?"
create_shr	=	"Create a Synology Hybrid RAID (SHR) volume after installation"
download_patch	=	"Download and install the latest DSM (recommended)"
download_patch_v2	=	"Install the latest DSM for new features and security fixes."
download_warn	=	"No Internet connection on {0}"
dsconfig_step_desc	=	"Please set password and server name."
dsconfig_step_title	=	"Enter _DISKSTATION_ Info"
dualhead_format_all_disk_question	=	"All data on the drives will be deleted during the installation. Are you sure you want to continue?"
erase_disk_desc	=	"All data on the hard drive(s) {0} will be deleted."
err_patch	=	"Failed to install the file. The file is probably corrupted."
error_filename	=	"You have selected a file with incorrect extension. Please make sure the file extension is ".pat" which is not case-sensitive."
error_step_desc	=	"Please launch <a href={0} target='_blank'>Synology Assistant</a> or go to <a href {0} target='_blank'>Web Assistant</a> search page to reconnect."
error_step_title	=	"Failed to Connect"
eula	=	"By clicking Install Now, you agree to the <a href='http://www.synology.com/company/terms_conditions#tabs_terms_EULA' target='_blank'>End User License Agreement</a>."
format_hd_confirm	=	"I understand that all data on these hard disks will be removed."
format_hd_question	=	"All data on the hard disk(s) {0} will be removed during installation. Are you sure you want to proceed?"
hint_default_pwd	=	"If this web page is unexpectedly refreshed or closed, please log into your {0} again as "admin" and leave the password blank."
info_step_desc	=	"Please ensure you have backed up hard drives before installing."
info_step_desc_usb_station	=	"Please ensure you have backed up micro SD card before installing."
info_step_title	=	"Welcome to your _DISKSTATION_"
info_step_title_usb_station	=	"Welcome to your {0}"
install_now	=	"Install Now"
launch_web_assis	=	"Search Manually"
migrate_step_desc	=	"A previous _OSNAME_ installation is found on the hard disks of your _DISKSTATION_. Choose your action from the below options."
migrate_step_desc_usb_station	=	"A previous DSM installation is found on the hard disks of your {0} and it ran into a problem while migrating to the new DSM installation. Choose your action from the below options."
migrate_step_desc_v2	=	"A _OSNAME_ installation on your previous {0} is found on the hard drives of your current _DISKSTATION_. Choose your action from the below options."
migrate_step_title	=	"Select Installation Type"
net_set	=	"Applying network settings"
note	=	"Note:"
password_confirm	=	"Confirm password"
password_create	=	"Create password"
patch_step_desc	=	"Always install the latest DSM to optimize performance."
patch_step_subtitle	=	"DSM is the operating system running on Synology NAS."
patch_step_title	=	"Install DiskStation Manager (DSM)"
pppoe_password	=	"Password"
pppoe_username	=	"User name"
recover_now	=	"Start System Recovery"
recover_start	=	"Repair System"
redirect_fail	=	"Failed to connect to _OSNAME_ login screen. Please search your _DISKSTATION_ using Synology Assistant."
serial_num	=	"Serial Number"
server_name	=	"Server name"
status_download	=	"Downloading"
status_format_data	=	"Formatting drives"
status_format_sys	=	"Formatting system partition"
status_install	=	"Installing DiskStation Manager"
status_reboot	=	"Restarting your _DISKSTATION_..."
status_start	=	"Initializing"
status_upload	=	"Uploading _OSNAME_ installation pack"
suggested	=	"(recommended)"
system_migration	=	"Migration: keep my files and most of the settings"
system_migration_info	=	"Keep the files and most of the settings of the previous DSM installation. Please note that some data and settings will still be lost. For detailed information, refer to <a href={0} target='_blank'>System Migration Tutorial</a>."
timer_unit	=	"seconds"
to_download_patch	=	"Install the latest DSM"
to_upload_patch	=	"Manual Install"
upgrade_reb	=	"Completing installation"
upload_info	=	"The .pat file can be found on the installation disc which comes with your product or on the <a href='http://www.synology.com/support/download.php' target='_blank'>Synology website</a>."
upload_patch	=	"Install DSM from my computer or installation disc"
upload_patch_v2	=	"Download from <a href='{0}' target='_blank'>Synology's Download Center</a>."
upload_select_file	=	"Browse"
waiting_desc	=	"After the installation is complete, you will see the login screen of your _DISKSTATION_. You are welcome to visit {0} to learn more about DiskStation Manager."
warn_erase_disk	=	"Note: All data on the hard drive(s) {0} will be deleted."
warn_erase_sd_card	=	"Note: All data on the micro SD card will be deleted."
warn_shr	=	"Note! All data in the hard drive(s) will be deleted while creating a SHR volume."

